Supported Product Supported Camera Supported Models Downloads Installation

Device Pack

device-pack-vivotek


 

Designed specifically for VIVOTEK’s VAST, NVRs and Shepherd, Device Pack can directly enable camera settings for VIVOTEK network cameras. As most configuration values of the Device Pack are identical to those found on VIVOTEK’s network camera webpage, users can save time when installing and setting up their cameras.

 

Supported Products

  • VIVOTEK VAST V1.10 or above, VAST 2 V2.3 or above.
  • VIVOTEK NVR: ND Series, NV Series, NR Series NVR.
    • ND9322P, ND9424P, ND9322P-v2, ND9424P-v2, ND9323P, ND9425P, ND9441, ND9441P, ND9541, ND9541P
      • Firmware V3.0.0.105 support Device pack V5.9.256 or below
      • Firmware V3.0.0.106b and V3.0.1.5 or above support Device Pack V5.9.276 or above
    • ND9312, RX9401
      • Firmware V2.5.1.3 support Device pack V5.9.256 or below
      • Firmware V2.7.0.4 or above support Device Pack V5.9.276 or above
    • ND8322P, ND8422P, ND8212W, ND8312
      • Firmware V2.4.0.204 support Device pack V5.9.256 or below
      • Firmware V2.4.0.205b and V2.3.1.102b support Device Pack V5.9.276 or above
    • NV9311P, NV9411P
      • Firmware V2.5.0.101 support Device pack V5.9.256 or below
      • Not support Device Pack V5.9.276 or above
  • VIVOTEK Shepherd V2.0.0.6 or above.

 

Supported Camera Settings

Difference settings for each product:

Camera Settings VMS (VAST) NVR Shepherd
Video
  • Video mode
  • Video stream
  • Codec type
  • Frame size
  • Max. frame rate
  • Video quality
  • Codec
  • Frame size
  • Maximum frame rate
  • Intra frame period
  • Video quality
  • Codec
  • Frame size
  • Max. frame rate
  • Intra frame period
  • Video quality
  • Max. Bitrate
Audio
  • Audio codec type
  • Bitrate
  • Audio codec type
  • Bitrate
  • Microphone input gain
  • Audio codec type
  • Bitrate
  • Microphone input gain
Image  
  • Video name
  • Power line frequency
  • Video orientation
  • Fisheye mount type
  • Image adjustment (Color, Brightness, Saturation, Contrast, Sharpness, Low light compensation, Gamma curve)
  • Timestamp
  • Video title
  • Video orientation (Flip, Mirror)
  • Color
  • Power line frequency
  • Day/Night settings (Switch B/W mode, IR cut filter, Light sensor sensitivity, External IR illuminator in night mode, IR LED)
Other
  • Remote focus
  • NTP Settings
  • Panoramic PTZ
  • Motion detection settings
  • PTZ (Operation, Preset/Patrol settings)
  • Remote focus – supported model list: FD9167-HT, FD9367-HTV, FD9368-HTV, IB9367-HT, IB9368-HT, IB9388-HT, IT9388-HT, IT9389-HT
  • System (Host name, Host time)
  • Security (User account, HTTPS)
  • Network (Network type, Network port)
  • Application (DI/DO trigger status settings. Motion detection)

 

Supported Models

VIVOTEK ND series NVRs don’t support 7000 series Network Cameras. For 8000 series, please refer to our support list.

Form Factor Models
Video Server VS8100, VS8100-v2, VS8102, VS8401, VS8801
Box Cameras IP8151, IP8152, IP8155, IP8161, IP8166, IP8162, IP8165, IP816A-HP, IP816A-LPC, IP8172, IP8173, IP9165-HP, IP9164-HT, IP9164-LPC, IP9165-HT, IP9165-LPC, IP9165-LPR, IP9171-HP, IP9171, IP9172-LPC, IP9181-H, IP9191-HT
Bullet Cameras IB8156, IB8168, IB8338-H, IB8338-HR, IB8354, IB8360, IB8367-R, IB8367-RT, IB8367-T, IB8367, IB8367A, IB8369, IB8369A, IB836B-EHF3, IB836BA-EHF3, IB836B-EHT, IB836BA-EHT, IB836B-HF3, IB836BA-HF3, IB836B-HRF3, IB836B-HRT, IB836B-HT, IB836BA-HT, IB8373-EH, IB8377-H, IB8377-EHT, IB8377-HT, IB8379-H, IB8381, IB8382-EF3, IB8382-ET, IB8382-F3, IB8382-RF3, IB8382-RT, IB8382-T, IB9360-H, IB9365-EHT, IB9365-EHT-A, IB9365-HT, IB9365-HT-A, IB9365-LPR, IB9367-EHT, IB9367-H, IB9367-HT, IB9368-HT, IB9371-EHT, IB9371-HRT, IB9371-HT, IB9380-H, IB9381-EHT, IB9381-HT, IB9381-HRT, IB9387-EH, IB9387-EHT, IB9387-EHT-A, IB9387-H, IB9387-HT, IB9387-HT-A, IB9387-LPR, IB9388-HT, IB9389-H, IB9389-HM, IB9389-HT, IB9389-EH, IB9389-EHM, IB9389-EHT, IB9391-EHT
IP8330, IP8331, IP8332, IP8335, IP8337, IP8355, IP8361, IP8362, IP8364, IP8365, IP8371, IP8372, IP9167-HP, IP9167-HT, IP9191-HP
IZ9361-EH
Cube Cameras IP8130, IP8131, IP8132, IP8133, IP8133W, IP8160, IP8160-W, IP8336
Fixed Dome Cameras BD5516-N, CD8371-HNTV, CD8371-HNVF2
FD8133, FD8134, FD8135, FD8136, FD8137, FD8138-H, FD8151, FD8152, FD8152V, FD8154, FD8155H, FD8156, FD8161, FD8162, FD8163, FD8164, FD8165H, FD8166, FD8166A, FD8166A-N, FD816BA-HF3, FD8167, FD8167A, FD8167-T, FD8168, FD8169, FD8169A, FD816B-HF2, FD816BA-HF2, FD816B-HT, FD816BA-HT, FD816C-HF2, FD816C-HSF2, FD816CA-HF2, FD8171, FD8173-H, FD8177-H, FD8177-HT, FD8179-H, FD8181, FD8182-F1, FD8182-F2, FD8182-T, FD8184-F2, FD8335, FD8338-HV, FD8355, FD8361, FD8362, FD8362E, FD8363, FD8365, FD8366-V, FD8367-TV, FD8367-V, FD8367A-V, FD8369A-V, FD8371EV, FD8371V, FD836B-EHTV, FD836BA-EHTV, FD836B-EHVF2, FD836BA-EHVF2, FD836B-HTV, FD836BA-HTV, FD836B-HVF2, FD836BA-HVF2, FD8371, FD8372, FD8373, FD8377-EHTV, FD8377-HTV, FD8377-HV, FD8379-HV, FD8381-EV, FD8382-ETV, FD8382-EVF2, FD8382-TV, FD8382-VF2, FD9165-HT, FD9165-HT-A, FD9166-HN, FD9167-H, FD9167-HT, FD9171-HT, FD9181-HT, FD9187-H, FD9187-HT, FD9187-HT-A, FD9189-H, FD9189-HM, FD9189-HT, FD9360-H, FD9365-EHTV, FD9365-EHTV-A, FD9365-HTV, FD9365-HTV-A, FD9366-HV, FD9367-EHTV, FD9367-HTV, FD9367-HV, FD9368-HTV, FD9371-EHTV, FD9371-HTV, FD9380-H, FD9381-EHTV, FD9381-HTV, FD9387-EHTV, FD9387-EHTV-A, FD9387-EHV, FD9387-HTV, FD9387-HTV-A, FD9387-HV, FD9388-HTV, FD9389-HV, FD9389-HMV, FD9389-HTV, FD9389-EHV, FD9389-EHMV, FD9389-EHTV, FD9391-EHTV
IT9360-H, IT9380-H, IT9388-HT, IT9389-H, IT9389-HT
180°/360° Cameras CC8130, CC8160, CC8370-HV, CC8371-HV, CC9380-HV, CC9381-HV
FE8171, FE8172, FE8173, FE8174, FE8174V, FE8180, FE8181, FE8181V, FE8182, FE8191-V, FE8191, FE8391-V, FE9180-H, FE9181-H, FE9182-H, FE9191, FE9380-HV, FE9381-EHV, FE9382-EHV, FE9382-EHV-v2, FE9391-EV, FE9582-EHNV
MS8391-EV, MS8392-EV, MS9321-EHV, MS9390-HV, SF8172
Multi-Adjustable Views Camera MA8391-ETV, MA9321-EHTV, MA9322-EHTV
Mobile Dome Cameras MD8531, MD8531H, MD8562, MD8563-DEH, MD8563-EH, MD8563-EHF2, MD8563-EHF, MD8564-EH, MD8565-N, MD9560-H , MD9560-DH, MD9561-H, MD9581-H
PT/PTZ Dome Cameras PD8136, PT8133, PZ81X1, PZ81XX
Speed Dome Cameras SD8161, SD8314E, SD8316E, SD8321E, SD8324E, SD8326E, SD8331E, SD8333, SD8333-E, SD8362, SD8363, SD8363E, SD8364, SD8364E, SD83X1, SD9161-H, SD9361-EH, SD9361-EHL, SD9362-EH, SD9362-EH-v2, SD9362-EHL, SD9363-EHL, SD9363-EHL-v2, SD9364-EH, SD9364-EH-v2, SD9364-EHL, SD9364-EHL-v2, SD9365-EHL, SD9366-EH, SD9366-EH-v2, SD9366-EHL, SD9374-EHL
Split-type Camera System VC8101, VC8201
Counting Camera SC8131

 

Downloads

Document Type Model Name Version Issued Date File Size
Software Device Pack 5.9.352 2021-03-01 1.7 MB
Software Device Pack 5.9.350 2021-02-01 1.7 MB
Software Device Pack 5.9.344 2021-01-04 1.7 MB
Software Device Pack 5.9.256   1.4 MB

 

Installation


 

For VAST 2

Please update VAST2 application to our latest VAST2.3 or above.

Following the steps below to update the device pack:
1. Download the device pack (*.vdp) from VIVOTEK website.
2. Run VAST2.exe, and login to the VAST2 server.

device pack vast2 1.login

 

3. Click Settings -> About.

device pack vast2 2.about

 

4. It shows VAST version and device pack information here.

device pack vast2 3.version

 

5. Click “Upload”.

device pack vast2 4.upload

 

6. The file browser pops up, and select the device pack file(*.vdp) for update.

device pack vast2 5.pop up

 

7. The upgrade is processing, please wait until the flow is done.

device pack vast2 6.uploading

 

8. Done.

device pack vast2 7.finish

 

For VAST

Please follow the steps below to install Device Pack:

1. Download the Device Pack (*.vdp).
2. Run LiveClient to login to the server.
3. Go to “Help” → ”About”.
4. Click Device Pack “Update…” to select the Device Pack file.

device pack vast 1

 

5. Click “Update”.

device pack vast 2

 

6. Finish.

device pack vast 3

 

For NVR

Please follow the steps below to install Device Pack:

1. Download the Device Pack file (*.vdp) onto the USB drive.
2. Insert the USB drive into the NVR.
3. Login to the server.
4. Go to the maintenance page.
5. Click the “Import” Device Pack button.

device pack nvr 1

 

6. Click “Update”.

device pack nvr 2

 

7. Wait for the update to complete.

device pack nvr 3

 

8. Confirm the Device Pack version via “Information”.

device pack nvr 4

 

For Shepherd

Please follow the steps below to install Device Pack:

1. Download the Device Pack file (*.vdp) 
2. Save this file with Shepherd.exe in the same folder
3. Run Shepherd.exe and it will launch Device Pack simultaneously.

 

 

GoTopTop of page

TOP


    500

    Send this to a friend