Specifications Downloads

nd8212w-solution-kit

 

 

Specifications

Model AW-FET-100C-120
Short Highlight 8xFE PoE + 2xFE UTP
Networking Specifications
10/100Mbps RJ45 PoE Port 8
10/100Mbps RJ45 Port 2
10/100/1000Mbps RJ45 Port
Gigabit SFP Slot

Gigabit RJ45/SFP Combo Ports
EX Mode PoE (200M@10Mbps) 2
* EX Mode:
1. CAT.6 or better UTP/STP cable is highly recommended.
2. Low quality cables will seriously limit the cabling distance.
3. Ex mode doesn’t support with the FE8391-V model.
VLAN Mode Supported
Ethernet Performance
Switching Capacity 2 Gbps
Mac Table 2 K
Jumbo Frame 1536 Bytes
Auto-MDI/MDI-X, Auto-Negotiation Supported
Power Specifications
Power Input Voltage 100VAC ~ 240VAC
 Max. PoE Output Power Per Port 54VDC, Max. 30W
 Total PoE Power Budget 120W
 IEEE 802.3af/at Supported
 Power Pin Assignment 1/2(+), 3/6(-)
 PoE PD Auto Detection  Supported
Surge Protection/Each PoE Port 4 KV
Surge Protection for AC Power 4 KV
General
Operating Temperature 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F)
Operating Humidity 10% ~ 90% non-condensing
Dimensions 220 (L) x 150 (W) x 44 (H) mm
Weight 1.2 kg

Certifications

EMC CE, FCC, VCCI, C-Tick Class A
Safety EN60950-1, IEC60950-1

 

 

Downloads

Link Datasheet

 

GoTopTop of page

TOP


500

Send this to a friend